Back to Hardware Reviews
Hardware Reviews
91

Antec’s C6 Curve Air is a show case at a budget price

Antec C6 Curve Air review roundup: PC Gamer scores this curved-glass mid-tower 91 at $95, but big PSUs and hot GPUs should check the limits first.

On
4 min read
Two Antec C6 Curve Air cases, one black and one white, with curved glass panels on a dark background beside a Curved glass panel heading

Pros

  • PC Gamer: clean, stylish curved panels
  • PC Gamer: surprisingly good cable management and an easy build
  • PC Gamer: exceptionally affordable
  • eTeknix: pillarless triple-sided glass with bottom-to-top airflow

Cons

  • PC Gamer: limited intake fan options
  • PC Gamer: PSU setup may catch some off guard
  • PC Gamer: no removable radiator brackets or anti-sag brackets

Curved glass, small price

The Antec C6 Curve Air is a mid-tower with curved tempered glass that lists at $95 in PC Gamer’s spec table, and both reviews agree it looks pricier than that. PC Gamer opened its verdict with “This might be the best chassis of 2026,” and eTeknix called it “One of the best cases of the year.”

Only PC Gamer puts a number on it: 91. eTeknix gives a written verdict and no score, so there is no average to calculate. The 91 on our score badge is PC Gamer’s alone, not a consensus, and we’d read it as one experienced builder’s verdict on a very good $95 case.

Cable management that needs few ties

PC Gamer’s list of positives starts with “Clean, and stylish with those curved panels” and includes “Surprisingly good cable management.” The reviewer’s build used one cable tie in total, helped by Velcro straps, plastic clips and rubber grommets. The trick is the PSU bay: a 160 mm power supply goes in sideways, with a power lead passthrough, so cables run straight up the back of the motherboard tray. eTeknix adds tool-free panels, 30 mm of cable space and support for back-connect motherboards.

The glass has a price. PC Gamer says it cuts cable-management space in half, and the reviewer couldn’t work out how to remove the front curved panel, which can stay on and braces the structure. Both the black and white versions exist, with white costing a little extra.

A black Antec C6 Curve Air case with lit components on a desk beside the Constellation Series C6 Curve Air logo
Image: Antec

Two floor fans do the intake work

eTeknix likes the airflow plan: bottom-to-top vertical cooling, recessed dual fans on the PSU shroud and a fine mesh top panel. PC Gamer likes the case too, but notes there are no other intake mounting points at the front or side beyond the two included 120 mm floor fans. Its reviewer worries those twin intakes “might not be quite enough to cool both a thirsty GPU and CPU combo longer into the future.”

Cutaway illustration of bottom-to-top airflow through a PC case under a Vertical cooling heading
Image: Antec

eTeknix lists two 120 mm PWM reverse fans on the shroud and one 140 mm PWM fan at the rear as pre-installed. The top takes a radiator up to 360 mm and the rear a 120 mm one. If you want a lot of cooling hardware, PC Gamer’s own suggestion is to rethink the fan layout rather than expect the stock one to cope with everything.

Close-up of the bottom intake fans beneath a graphics card under a Bottom air intake optimization heading
Image: Antec

Check these limits first

PC Gamer’s cons are “Limited intake fan options,” “PSU setup may catch some off guard” and “No removable radiator brackets or anti-sag brackets.” The PSU limit is concrete: the spec table lists ATX units at 160 mm side-mounted or 150 mm traditional, and the reviewer notes the PSU fan must face down because the shroud is solid above it. A similar fit caveat runs through our Formula V Line Air Power G10 roundup, so measure the PSU before you order either case.

On graphics cards, eTeknix says it fits an RTX 5090 and lists a 450 mm GPU limit. PC Gamer’s warning is about weight rather than length: “If you’re using a larger triple-slot, pick up an aftermarket anti-sag mount elsewhere.” The missing radiator bracket also made the reviewer fiddle for too long plugging in the pump, so PC Gamer suggests installing the radiator last.

Specs as listed by PC Gamer and eTeknix (the CPU cooler height, fans and USB-C speed come from eTeknix):

MotherboardsATX, Micro-ATX, Mini-ITX
Max GPU length450 mm
Max CPU cooler height180 mm
RadiatorsUp to 360 mm top, 120 mm rear
PSUATX, 160 mm side-mounted or 150 mm traditional
Pre-installed fans2 x 120 mm PWM reverse, 1 x 140 mm PWM rear
Weight9.12 kg
Price in PC Gamer’s table$95

Buy it, or skip it

  • ✅ Buy if you want a clean, curved-glass case around $95 and an easy build, with a PSU that fits the side-mounted bay.
  • ❌ Skip if you run a heavy triple-slot graphics card and don’t want to add your own anti-sag support.
  • ❌ Skip if you want a removable radiator bracket or more intake mounting points than the two floor fans.

Our take on the C6 Curve Air

We think this is the right kind of budget case: it spends its money on how the build looks and goes together, and it’s honest about what it leaves out. At $95 we’d pick it over another black glass box, but we’d check three numbers first: the 450 mm GPU limit, the PSU depth, and whether two 120 mm floor intakes fit the heat your parts make. If you want a different panoramic look, our take on HAVN’s HS 360 is the other one to read.

A case this friendly also makes a good first build. If you’re still deciding whether to build at all, our prebuilt versus building your own guide covers the time-and-warranty trade.

0 comments

Join the conversation

Anyone can read comments. Sign in or create a free account to post and reply.

No comments yet. Start the conversation.